HVACR

Trademark

Product Categories

Malco Edge Categories

Markets

New


MalcoEdge™ 5/8″ Flare Nut Torque Wrench – RTW625

The MalcoEdge RTW625 Flare Nut Torque Wrench is pre-set to deliver 55 ft-lbs (±5 ft-lbs) on 5/8″ flare nuts, helping HVACR technicians avoid the over- and under-tightening that leads to […]

View

New


MalcoEdge™ 3/8″ Flare Nut Torque Wrench – RTW375

The MalcoEdge RTW375 Flare Nut Torque Wrench is pre-set to deliver 28 ft-lbs (±1.5 ft-lbs) on 3/8″ flare nuts, helping HVACR technicians avoid the over- and under-tightening that leads to […]

View

New


MalcoEdge™ 1/2″ Flare Nut Torque Wrench – RTW500

The MalcoEdge RTW500 Flare Nut Torque Wrench is pre-set to deliver 40.6 ft-lbs (±4.5 ft-lbs) on 1/2″ flare nuts, helping HVACR technicians avoid the over- and under-tightening that leads to […]

View

New


MalcoEdge™ 1/4″ Flare Nut Torque Wrench – RTW250

The MalcoEdge RTW250 Flare Nut Torque Wrench is pre-set to deliver 13.3 ft-lbs (±1.5 ft-lbs) on 1/4″ flare nuts, helping HVACR technicians avoid the over- and under-tightening that leads to […]

View

New


MalcoEdge™ Nitrogen Purge Kit – NPK1

The MalcoEdge NPK1 Nitrogen Purge Kit pairs the NPT Nitrogen Purge Tool with the NRHD Nitrogen Regulator in one protective hard case, giving HVACR technicians a complete nitrogen purging and […]

View

New


MalcoEdge™ Nitrogen Purge Tool – NPT

The MalcoEdge NPT Nitrogen Purge Tool gives HVACR technicians a fast, repeatable way to control nitrogen flow while brazing refrigerant lines. A simple dial moves between PURGE, BRAZE, and OFF […]

View

New


MalcoEdge™ Nitrogen Pressure Regulator – NRHD

The MalcoEdge NRHD Nitrogen Pressure Regulator gives HVACR technicians reliable, repeatable pressure control for pressure testing and nitrogen charging. A brass piston-type valve and smooth-turning knob make it easy to […]

View

New


MalcoEdge™ Gasket Picker – GP1

The MalcoEdge Gasket Picker is built for removing gaskets and O-rings from hoses, fittings, and tools where fingers can’t reach. Over time, worn gaskets can cause leaks and poor sealing, […]

View

New


MalcoEdge™ Hi-Flow Core Removal Tool Dual Valve with Sight Glass – CRT2Y

The MalcoEdge CRT2Y Hi-Flow Core Removal Tool features a Y-shaped dual-valve body with an integrated sight glass, allowing HVACR technicians to visually confirm the valve core is securely captured on […]

View

New

Malco Product Image Placeholder

MalcoEdge™ HYE Replacement Head 5/8″ – HYEH625

Replacement 5/8″ expander head for the MalcoEdge™ HYE Hydraulic Tube Expander. Delivers smooth, consistent tube expansions for secure, leak-resistant connections in HVAC/R applications.

View

New


MalcoEdge™ HYE Replacement Head 1-1/8″ – HYEH1125

Replacement 1-1/8″ expander head for the MalcoEdge™ HYE Hydraulic Tube Expander. Delivers smooth, consistent tube expansions for secure, leak-resistant connections in HVAC/R applications.

View

New


MalcoEdge™ HYE Replacement Head 1-5/8″ – HYEH1625

Replacement 1-5/8″ expander head for the MalcoEdge™ HYE Hydraulic Tube Expander. Delivers smooth, consistent tube expansions for secure, leak-resistant connections in HVAC/R applications.

View

New


MalcoEdge™ HYE Replacement Head 1-3/8″ – HYEH1375

Replacement 1-3/8″ expander head for the MalcoEdge™ HYE Hydraulic Tube Expander. Delivers smooth, consistent tube expansions for secure, leak-resistant connections in HVAC/R applications.

View

New


MalcoEdge™ HYE Replacement Head 3/4″ – HYEH750

Replacement 3/4″ expander head for the MalcoEdge™ HYE Hydraulic Tube Expander. Delivers smooth, consistent tube expansions for secure, leak-resistant connections in HVAC/R applications.

View

New


MalcoEdge™ HYE Replacement Head 7/8″ – HYEH875

Replacement 7/8″ expander head for the MalcoEdge™ HYE Hydraulic Tube Expander. Delivers smooth, consistent tube expansions for secure, leak-resistant connections in HVAC/R applications.

View

New


MalcoEdge™ HYE Replacement Head 3/8″ – HYEH375

Replacement 3/8″ expander head for the MalcoEdge™ HYE Hydraulic Tube Expander. Delivers smooth, consistent tube expansions for secure, leak-resistant connections in HVAC/R applications.

View

New


MalcoEdge™ HYE Replacement Head 1/4″ – HYEH250

Replacement 1/4″ expander head for the MalcoEdge™ HYE Hydraulic Tube Expander. Delivers smooth, consistent tube expansions for secure, leak-resistant connections in HVAC/R applications.

View

New


MalcoEdge™ HYE Replacement Head 1/2″ – HYEH500

Replacement 1/2″ expander head for the MalcoEdge™ HYE Hydraulic Tube Expander. Delivers smooth, consistent tube expansions for secure, leak-resistant connections in HVAC/R applications.

View

New


MalcoEdge Turbo Tube Reamer Drill Attachment Kit (TTRK)

The MalcoEdge Turbo Tube Reamer Kit delivers a complete tube deburring solution by combining the TR reamer with the TTR drill-powered attachment in one convenient kit. Designed to improve efficiency […]

View

New


MalcoEdge Aluminum Hi-Flow Ys and Core Tools Seal Kit (ATSK1)

The MalcoEdge ATSK1 Seal Kit is designed to maintain peak performance across your Hi-Flow Y fittings and core tools. Over time, seals wear down from repeated use, leading to poor […]

View

New


MalcoEdge Replacement TurboFlow Hose Gaskets 3/8″ – 10 Pack (TFG38)

The MalcoEdge TFG38 Replacement Gaskets are designed to keep your 3/8″ TurboFlow hoses and fittings sealing properly. Over time, gaskets wear down from repeated connections and exposure to pressure and […]

View

New


MalcoEdge™ Inspection Mirror (IM1)

The MalcoEdge Inspection Mirror allows technicians to visually inspect areas that are otherwise out of direct line of sight. Ideal for checking the backside of braze joints, fittings, and connections, […]

View

New


MalcoEdge Hi-Flow Access T-Fitting 5/16″ x 1/4″ x 5/16″ (CT516)

The MalcoEdge CT516 Hi-Flow Access T-Fitting is designed to expand the functionality of 5/16″ service ports, allowing technicians to connect multiple tools or hoses at once. This is especially useful […]

View

New


MalcoEdge Hi-Flow Access T-Fitting 1/4″ x 1/4″ x 1/4″ (CT14)

The MalcoEdge CT14 Hi-Flow Access T-Fitting allows technicians to connect multiple hoses or tools to a single 1/4″ service port. Ideal for setups that require simultaneous pressure measurement and refrigerant […]

View

New


MalcoEdge Hi-Flow Core Control Depressor Tool 5/16″ x 5/16″ (CCD516)

The MalcoEdge CCD516 Hi-Flow Core Control Depressor Tool is purpose-built for 5/16″ service ports commonly found on mini-split systems and other tight-access installations. Its compact profile allows technicians to connect […]

View

New


MalcoEdge Hi-Flow Core Control Depressor Tool 1/4″ x 1/4″(CCD14)

The MalcoEdge CCD14 Hi-Flow Core Control Depressor Tool is built for situations where standard core removal tools can’t access the service port. Its compact design allows technicians to reach tight […]

View

New


MalcoEdge Dual-Valve Hi-Flow Y Branch 3/8″ x 3/8″ x 3/8″ (HFYV38)

The MalcoEdge HFYV38 Dual-Valve Hi-Flow Y Branch combines high-flow performance with independent flow control. Each leg of the Y features an integrated ball valve, allowing technicians to isolate hoses, control […]

View

New


MalcoEdge Hi-Flow Y Branch 1/2″ x 3/8″ x 3/8″ (HFY12)

The MalcoEdge HFY12 Hi-Flow Y Branch is designed for systems with larger 1/2″ connections, allowing technicians to split flow into dual 3/8″ hoses for balanced, controlled evacuation and recovery. Its […]

View

New


MalcoEdge Hi-Flow Y Branch 1/4″ x 3/8″ x 3/8″ (HFY14)

The MalcoEdge HFY14 Hi-Flow Y Branch is built to adapt smaller 1/4″ service ports to high-flow 3/8″ hose configurations. This allows technicians to increase evacuation and recovery speed by utilizing […]

View

New


MalcoEdge Hi-Flow Y Branch 3/8″ x 3/8″ x 3/8″ (HFY38)

The MalcoEdge HFY38 Hi-Flow Y Branch is designed to increase system efficiency by allowing multiple 3/8″ hoses to connect to a single port while maintaining optimal flow characteristics. Unlike traditional […]

View

New


MalcoEdge™ Flare Nut Ratcheting Torque Wrench Kit – RTWK

The MalcoEdge RTWK Flare Nut Ratcheting Torque Wrench Kit combines the RTW250, RTW375, RTW500, and RTW625 in a single carrying case, so HVACR technicians have the right pre-set torque wrench […]

View

New


MalcoEdge™ Core Removal Tool 1/4″ – CRT1

The MalcoEdge CRT1 Core Removal Tool connects to a 1/4″ service port and lets HVACR technicians remove the valve core to increase flow rates during evacuation and recovery. The magnetic […]

View

New


MalcoEdge™ Core Removal Tool 5/16″ – CRT3

The MalcoEdge CRT3 Core Removal Tool connects directly to 5/16″ service ports, allowing HVACR technicians to remove the valve core to maximize flow during evacuation and recovery. The magnetic capture […]

View

New


MalcoEdge™ Heavy-Duty Manual Tube Reamer – Inside/Outside Reaming (TR)

The MalcoEdge™ TR Heavy Duty Tubing Inside/Outside Reamer is a heavy-duty tube tool designed for quick and efficient pipe edge preparation. It features a durable aluminum body and four corrosion […]

View

New


MalcoEdge™ DTS Deburring Tool for Copper, Aluminum, and Plastic Tubing

The MalcoEdge™ DTS Deburring Tool is designed for fast, precise removal of internal burrs from copper, plastic, aluminum, and steel tubing. Its swiveling high-speed steel blade delivers consistent burr removal, […]

View

New


MalcoEdge™ TC1014 Heavy-Duty Tube Cutter 1/4 to 1-1/4 Inch

The MalcoEdge™ TC1014 Heavy Duty Tube Cutter (1/4″–1-1/4″) is engineered for high-strength performance in demanding cutting applications. Built with a titanium-plated cutting wheel, this tool slices through copper, aluminum, and […]

View