Home / Jobsite Essentials
Trademark
Product Categories
Malco Edge Categories
Markets
Break Away Knife
Die cast heavy duty model.
Double Point Utility Blades
Extra durable, heavy gauge blades fit Malco 4PK, 9PK knives & most other brands.
Sheet Metal Drill Bits
Sheet metal drills with 135° split point design bite into metal precisely where wanted – will not wander.
Sheet Metal Double Ender Drill Bits
Two points for twice the life, twice the convenience.
Carbide Tipped Rotary Percussion Bits
Use in any rotary or rotary percussion drilling device for unexcelled performance in brick, tile, granite, concrete, masonry and other similar hard and dense materials.
Step Drills
A unique double flute design ensures the penetration of soft or thin materials at the proper speed.
Magnetic Bit Holder
Power drive 1/4-inch hex shank fits any power drill or 1/4-inch power drive holder. Accepts 1/4-inch hex shank insert bits.
Phillips Chuck Drivers
Power drive 1/4-inch hex insert shank fits any electric power drill or 1/4-inch power drive holder.
Utility Caulking Gun CG10
Easy loading and lightweight for smooth, clean operation.
Professional Square Piston Design Caulking Gun CG20
Heavy duty professional model caulking guns with thumb-activated pressure release.
Easy Dispensing Caulking Gun CG18
Smooth action with large, comfortable power grip.
Flexible Lightweight Caulking Gun CG12
Compact design stores in a toolbox.
Pin Vise
Use in hand or insert in drill chuck. Pin Vise holds wire gauge drill sizes 61 to 80.
Fin Straightening Tools
The FST tools straightens commonplace 8, 10, 12, or 14 fins per inch. Use the FST2 tool for straightening closely spaced 16, 18, 20, or 22 fins per inch.
Hand Held Magnetic Sweep
Powerful magnetic surface efficiently picks up debris. Quick release sleeve allows debris to be easily removed. Quick, Easy, Efficient!
Dead Blow Hammer
One-piece, 17-ounce (482 g) urethane hammer is non-marring, non-sparking and non-recoiling.
Square Head Chuck Drivers
For driving square head, (Robertson), screws into wood and sheet metal.
Abrasive Cloth
Specially processed for cleaning and preparing solder joint fittings.
Abrasive Mesh
180 grit open mesh cleans with both sides, requires only light pressure, lasts twice as long as cloth.
Malco® Quick Release Set Arbor and Pilot Drill (Carbide Tipped) – HHA5
The Malco HHA5 Quick Release Set pairs the HA3 Quick Connect Arbor with a Carbide Tipped Quick Change Pilot Drill for demanding cutting applications. Compatible with hole saws from 1-3/8 […]
Malco® Quick Release Set Arbor and Pilot Drill (High Speed Steel) – HHA4
The Malco HHA4 Quick Release Set includes the HA3 Quick Connect Arbor paired with a High Speed Steel Quick Change Pilot Drill. Designed for hole saws from 1-3/8 in. to […]
Malco® Quick Change Pilot Drill (Carbide Tipped) – HH5
The Malco HH5 Quick Change Pilot Drill features a carbide tipped cutting point for longer life in demanding applications. Designed for use with the HA3 Quick Connect Arbor, it includes […]
Malco® Quick Change Pilot Drill (High Speed Steel) – HH4
The Malco HH4 Quick Change Pilot Drill is constructed from durable High Speed Steel and integrates seamlessly with the HA3 Quick Connect Arbor. Featuring a built-in 10 mm hex shank […]
Malco® Quick Connect Arbor (Carbide Tipped) – HA3
The Malco HA3 Quick Connect Arbor is engineered for speed and durability. Featuring an industry-standard 5/8-18 thread, it fits hole saws from 1-3/8 in. to 6-5/16 in. (35–160 mm). The […]
New
Malco® Bi-Metal Hole Saw, 4 1/8″ (102 mm) (HSB4125)
Built for consistent performance across the most common job-site materials, the Malco® 4 1/8″ (102 mm) Bi-Metal Hole Saw is designed for pros who need clean, accurate cuts day in […]
Malco® Bi-Metal Hole Saw, 3 5/8″ (92 mm) (HSB3625)
Built for consistent performance across the most common job-site materials, the Malco® 3 5/8″ (92 mm) Bi-Metal Hole Saw is designed for pros who need clean, accurate cuts day in […]
Malco® Bi-Metal Hole Saw, 3 1/8″ (79 mm) (HSB3125)
Built for consistent performance across the most common job-site materials, the Malco® 3 1/8″ (79mm) Bi-Metal Hole Saw is designed for pros who need clean, accurate cuts day in and […]
Malco® Bi-Metal Hole Saw, 2 5/8″ (66 mm) (HSB2625)
Built for consistent performance across the most common job-site materials, the Malco® 2 5/8″ (66 mm) Bi-Metal Hole Saw is designed for pros who need clean, accurate cuts day in […]
Malco® Bi-Metal Hole Saw, 2 3/8″ (60 mm) (HSB2375)
Built for consistent performance across the most common job-site materials, the Malco® 2 3/8″ (60 mm) Bi-Metal Hole Saw is designed for pros who need clean, accurate cuts day in […]
Malco® Bi-Metal Hole Saw, 2″ (51 mm) (HSB2000)
Built for consistent performance across the most common job-site materials, the Malco® 2″ (51 mm) Bi-Metal Hole Saw is designed for pros who need clean, accurate cuts day in and […]
Malco Tin Master™ Hammer (TMH1) – 18 oz Tinner’s Hammer with Built-In Drive Cleat Bending Slot
The Malco Tin Master™ Hammer (TMH1) is a jobsite-ready tool built for HVAC and sheet metal pros who need strength, speed, and reliability. This 18 oz. tinner’s hammer is forged […]
Malco® Carbide Tipped Hole Saw, 2″ (51 mm) (HSC2000)
Designed for demanding HVAC applications, the Malco® 2″ (51 mm) Carbide-Tipped Hole Saw delivers the durability and cutting power professionals need when working through abrasive and multi-material wall systems. Engineered […]
Malco® Carbide Tipped Hole Saw, 2 1/2″ (64 mm) (HSC2500)
Designed for demanding HVAC applications, the Malco® 2 1/2″ (64 mm) Carbide-Tipped Hole Saw delivers the durability and cutting power professionals need when working through abrasive and multi-material wall systems. […]
Malco® Carbide Tipped Hole Saw, 3″ (76 mm) (HSC3000)
Designed for demanding HVAC applications, the Malco® 3″ (76 mm) Carbide-Tipped Hole Saw delivers the durability and cutting power professionals need when working through abrasive and multi-material wall systems. Engineered […]
Malco® Carbide Tipped Hole Saw, 3 3/4″ (95 mm) (HSC3750)
Designed for demanding HVAC applications, the Malco® 3 3/4″ (95 mm) Carbide-Tipped Hole Saw delivers the durability and cutting power professionals need when working through abrasive and multi-material wall systems. […]
Malco® Carbide Tipped Hole Saw, 4 1/4″ (108 mm) (HSC4250)
Designed for demanding HVAC applications, the Malco® 4 1/4″ (108 mm) Carbide-Tipped Hole Saw delivers the durability and cutting power professionals need when working through abrasive and multi-material wall systems. […]
Malco® Carbide Tipped Hole Saw, 5 1/4″ (133 mm) (HSC5250)
Designed for demanding HVAC applications, the Malco® 5 1/4″ (133 mm) Carbide-Tipped Hole Saw delivers the durability and cutting power professionals need when working through abrasive and multi-material wall systems. […]
Malco® Carbide Tipped Hole Saw, 6 1/4″ (159 mm) (HSC6250)
Designed for demanding HVAC applications, the Malco® 6 1/4″ (159 mm) Carbide-Tipped Hole Saw delivers the durability and cutting power professionals need when working through abrasive and multi-material wall systems. […]
Malco® Bi-Metal Hole Saw, 2 3/4″ (70 mm) (HSB2750)
Built for consistent performance across the most common job-site materials, the Malco® 2 3/4″ (70 mm) Bi-Metal Hole Saw is designed for pros who need clean, accurate cuts day in […]
NEW! – Malco 10 Pack Nozzle Replacement (CGSN1) – For CGS1 Caulk Gun
Keep going on the job with the 10 pack of the black Malco Replacement Nozzles are for replacing the nozzles that come in the Malco CGS1 Caulking Tool Kit. Made […]
NEW! Malco 20 oz. Sausage Caulking Gun Tool Kit 12:1 Ratio Drive CGS1
Malco’s 20-oz Sausage Gun Style Caulking Gun Kit offers value to trade pros with ownership through lower-cost sealant per ounce and removes the need to deal with bulky empty cartridges […]
NEW! Malco 1/10 Gallon High Thrust Caulking Gun 26:1 Ratio Drive CGC1
The Malco CGC1 1/10 Gallon (10 oz) 26:1 High Thrust Caulking Gun is a professional-grade tool that delivers precise and smooth material application. This caulk gun is popular in the […]
10-Piece Screw Extractor Kit
Unique Extractor Kit features Left Handed Cobalt Drill bits and Straight-Fluted Extractors to make screw and bolt extraction faster, easier and safer.
Impact Grade Quick-Change Extension Bits
Extensions fit any power drill or 1/4-inch power drive holder. Ball bearing on extensions’ holders provides a positive lock on 1/4-inch hex shank chuck drivers and bits.
Sheet Metal Hammers: Riveting
Available in vinyl gripped and leather gripped.
Sheet Metal Hammer: Setting
Duct Ripper
Specially angled ground tip easily punctures and rips duct to the desired length starting hole.
Quick Open Knife
Blade change is fast and easy with just a turn of the knob
Top Button Action Utility Knife
