MalcoEdgeâ„¢ 2 Valve Compact Multi-Gas Analog Manifold, R22, R410A (M2VCMG)

The Where To Buy map requires marketing cookies to be accepted. Please change your cookie preferences by clicking here and accepting cookies.


The MalcoEdgeâ„¢ 2 Valve Compact MultiGas Analog Manifold is a smaller, lighter 2-valve option for daily system diagnostics. It is easy to carry and store in a tool bag, and includes ball valves and a sight glass.

The 50mm gauges are compact but still easy to read against refrigerant P/T charts, with Class 1 accuracy (plus or minus 1% full scale). The low side gauge reads to 500 psi full scale and the high side gauge to 800 psi. 1/4-turn ball valves are quicker to operate than multi-turn piston valves.

A flexible mounting strap with hook and magnet mount options lets you hang the gauges wherever is convenient on the job. Manifold port connections and the center port storage connection are 1/4 in. SAE.

This multi-gas version is for R22 and R410A refrigerants.

Features

  • Compact, lightweight 2-valve body that carries and stores easily in a tool bag
  • 1/4-turn ball valves and an integrated sight glass in a compact body
  • 50mm Class 1 gauges, accurate to within 1% of full scale, readable against refrigerant P/T charts
  • Flexible strap hangs the manifold from a hook or a magnet
  • Multi-gas version for R22 and R410A refrigerants
  • 500 psi low side and 800 psi high side full scale; 1/4 in. SAE manifold ports and 1/4 in. SAE center port storage connection

FAQs

Q1: Should I dedicate a gauge set to a specific refrigerant or clean them between service calls?

A1: We recommend dedicating a manifold to each refrigerant for efficiency. Alternatively, clean and flush your manifolds when switching between refrigerants.

Q2: Do you offer manifold recalibration?

A2: No, manifold recalibration is not available. The gauges include a calibration screw that lets you re-zero them if they are slightly out of calibration due to altitude changes or wear over time. If you are unable to readjust the zero position, Malco recommends replacing any gauge that has drifted too far outside of calibration. Replacement gauges for this product are RGLSMG50 and RGHSMG50.

Q3: What is unique about MalcoEdge manifolds?

A3: MalcoEdge ball valves are spring-loaded, making the seals last longer. Compared to traditional multi-turn piston valves, the ball valves open and close quickly and easily.

Q4: Which refrigerant saturation temperatures are printed on the gauges?

A4: R22, R410A

Q5: Does hose length matter when pulling a vacuum?

A5: Yes. The shorter the hose and the larger its diameter, the more efficiently the vacuum will be pulled.

Q6: Can I use the same hoses with a variety of refrigerants?

A6: MalcoEdge hoses are compatible with popular refrigerants; however, we do not recommend using multiple refrigerants in the same hoses unless you take the time to flush them with a product such as ACE Powerflush. Alternatively, we recommend using different hoses for specific refrigerants to prevent cross-contamination from oils remaining in the hoses.

Q7: Do I need to flush and clean my equipment when switching between refrigerants?

A7: Some refrigerants cannot be mixed because they use different lubricants. As a best practice, flush the pumps, hoses, manifolds, and other components with a cleaner to ensure they do not cross-contaminate. We recommend flushing the system with ACE Powerflush between services.

Q8: What size are the keeper ports on this manifold?

A8: 1/4″

Downloads

My Review for MalcoEdgeâ„¢ 2 Valve Compact Multi-Gas Analog Manifold, R22, R410A (M2VCMG)

  • This field is for validation purposes and should be left unchanged.