HVACR - Sheet Metal Duct

New


NEW! – Malco 10 Pack Nozzle Replacement (CGSN1) – For CGS1 Caulk Gun

Keep going on the job with the 10 pack of the black Malco Replacement Nozzles are for replacing the nozzles that come in the Malco CGS1 Caulking Tool Kit. Made […]

View

New


NEW! Malco 20 oz. Sausage Caulking Gun Tool Kit 12:1 Ratio Drive CGS1

Malco’s 20-oz Sausage Gun Style Caulking Gun Kit offers value to trade pros with ownership through lower-cost sealant per ounce and removes the need to deal with bulky empty cartridges […]

View

New


7-in-1 C-RHEX® Flip Bit #2 Robertson (Square) Model

QUALITY MEETS PERFORMANCE Malco’s 7-in-1 C-RHEX® Flip Bit #2 Robertson (Square) model with cleanable, reversible, and stackable, color-coded sockets featuring an ultra-powerful magnet with integrated driver head options.  Malco’s 7-in-1 […]

View

New


7-in-1 C-RHEX® Flip Bit #2 Phillips Model

QUALITY MEETS PERFORMANCE Malco’s 7-in-1 C-RHEX® Flip Bit #2 Phillips model with cleanable, reversible, and stackable, color-coded sockets featuring an ultra-powerful magnet with integrated driver head options.  Malco’s 7-in-1 C-RHEX® […]

View

New


7-in-1 C-RHEX® Flip Bit T25 Model

QUALITY MEETS PERFORMANCE WITH MALCO C-RHEX® 7-IN-1 FLIP T25 Malco’s 7-in-1 C-RHEX®  Flip Bit T25 model with cleanable, reversible, stackable and color-coded sockets featuring an ultra-powerful magnet with integrated T25 […]

View

New


C-RHEX® 3/8" & 7/16"

C-RHEX® Cleanable, Reversible Magnetic Hex Drivers (3/8″ and 7/16″)

Malco’s 3/8″ and 7/16″ C-RHEX® cleanable reversible hex drivers fit over a 1/4-inch magnet-tipped, ball locking hex shaft, and can be quickly reversed to change sizes. Get more done by […]

View

New


C-RHEX® Sawtooth 3/8 and 7/16 inch

Malco’s 3/8″ and 7/16″ C-RHEX® cleanable reversible hex drivers, with sawtooth features, are the perfect solution for rapidly removing sealant and adhesive-coated fasteners. Get more done by spending less time […]

View

Andy™ Camouflage Aluminum Handled Snips 12”

Limited Edition Camouflage Snips hydro dipped with a ceramic clear coat. Sleek styling, easy blade replacement and larger handles make the Andy Snip more versatile. A sleek head design improves […]

View

C-RHEX KIT 1

For maximum accessibility and productivity, Trade Pros can have various hex drivers with different sizes and lengths on hand to easily access tight spaces. The five-piece kit includes multiple hex […]

View

New


c-rhex sawtooth by malco

C-RHEX SAWTOOTH

Rapidly remove screws covered in mastic or sealant with Malco’s new C-RHEX® SAWTOOTH drivers. The must-have hex drivers for every toolkit, Malco’s C-RHEX® SAWTOOTH drivers are versatile, compact and highly […]

View

New


Andy™ Offset Aluminum Handled Snips 12”

Sleek styling, easy blade replacement, and offset handles make Malco’s offset 12″ AndyTM snip more versatile. Ideal as a vinyl siding snip or for cutting aluminum, copper, or sheet metal. […]

View

New


C-RHEX® Cleanable, Reversible Magnetic Hex Drivers (7mm and 8mm)

Malco Products unique C-Rhex line of products (model #’s MSHCM3, MSHMLCM3, and MSHXLCM3) ensures that 7 mm and 8 mm magnetic hex drives are always on hand.

View

New


C-RHEX® Cleanable, Reversible Magnetic Hex Drivers (8mm and 10mm)

Malco Products unique C-Rhex line of products (model #’s MSHCM2, MSHMLCM2, and MSHXLCM2) ensures that 8 mm and 10 mm magnetic hex drives are always on hand.

View

New


C-RHEX® Cleanable, Reversible Magnetic Hex Drivers (6mm and 8mm)

Malco Products unique C-Rhex line of products (model #’s MSHCM1, MSHMLCM1, and MSHXLCM1) ensures that 6 mm and 8 mm magnetic hex drives are always on hand.

View

New


Four different sizes of Malco slimmer size C-Rhex Drivers with a 5/16" and 3/8" hex head

C-RHEX® Cleanable, Reversible Magnetic Hex Drivers (5/16″ and 3/8″)

Malco Products unique C-Rhex line of products (model #’s MSHC1, MSHLC1, MSHMLC1, and MSHXLC1) ensures that 5/16 and 3/8-inch magnetic hex drives are always on hand.

View

Image of Malco's sheet metal cutter drill attachment tool

TurboShear® – Heavy Duty, Sheet Metal Cutting Drill Attachment

Malco’s popular sheet metal tool quickly attaches to the chuck of a minimum 12-volt cordless or an A/C electric drill. Capable of 18 gauge capacity in galvanized sheet metal. Telescoping clamp fits large or small drill housing.

View

TSMD Double Cut Sheet Metal Shear Drill Attachment

TurboShear® – Double Cut Drill Attachment

Make your drill a double-cut metal shear. Now you can get double-cut performance in a versatile Malco TurboShear.

View

TS1 Malco TurboShear Sheet Metal Cutting Tool

TurboShear®

The original TurboShear sheet metal cutting tool. Quickly attaches to the chuck of a minimum 12-volt cordless or an A/C electric drill. A 20 gauge capacity in galvanized sheet metal.

View

Malco C5A2 Sheet Metal Crimping Tool Attachment

TurboCrimper® IMPACT

Quickly makes your impact driver a power crimper for 30-24 ga. (0.41-0.71 mm) round metal duct and (0.31-0.61 mm) stove pipe. The extra power of the TurboCrimper, is five times faster than manual sheet metal crimpers, making your job a lot easier.

View

Malco's 5 Blade Sheet Metal Crimper set in front of a black background

5-Blade Sheet Metal Crimper

The five blades on the Malco C5R allows maximum crimping power, producing a 1-5/8 inch (41.3 mm) long, shallow, double crimp that replicates factory indentations and ensures a tight fitting, leak-proof connection.

View

Malco C6R Offset 5 Blade Sheet Metal Crimper

5-Blade Offset Sheet Metal Crimper

The offset sheet metal crimper is an ergonomic solution that is ideal for tight working quarters or working over-head.

View

Malco SC3R Sheet Metal Crimper

3-Blade Sheet Metal Crimper

Downsizes heavy stove pipe and round metal duct to create a male connection for joining sections.

View

Malco SC1 Single Sheet Metal Crimper

Single Sheet Metal Crimper

Fast, easy to use and lightweight. Handy lock makes tool pocket sized.

View

New


All four sizes of Malco's CRhex products being shown side by side with the hex driver's socket's detached

C-RHEX® Cleanable, Reversible Magnetic Hex Drivers (1/4″ and 5/16″)

Malco Products unique C-Rhex line of products (model #’s MSHC, MSHLC, MSHMLC, and MSHXLC) ensures that 1/4 and 5/16-inch magnetic hex drives are always on hand.

View

Malco Zip-In Self Piercing Sheet Metal Screw

Zip-in® Self Piercing Sheet Metal Screws

Malco Zip-in® Sheet Metal screws are made with quality in mind. The screws provide faster driving and a greater capacity for fastening heavier gauges of sheet metal than any other self-piercing type. These #1 rated screws work best when used with a Malco C-RHEX™ Cleanable, Reversible Dual Sided Hex Driver.

View

Malco's Bit Tip Drill and Tap Sheet Metal Screw

Bit-Tip® – Drill and Tap Screws

Malco’s Bit-Tip® Drill and Tap Screws produces the optimum hole size, resulting in better thread engagement and a tighter fit. One operation fastening also means no alignment problems.

View

Malco Drill-In Style Sheet Metal Screw

Drill-in Screws Type A, Single Thread

Malco’s Drill-In screws have a hex shaped slotted head and include 10×1-1/2, 10×2, and 12×2 screw thread/sizes.

View

Malco's Zip In Sheet Metal Screw With Pan Head Style Top

Square Pan Head Zip-in® Sheet Metal Screws

Malco’s Pan Head style screws offer the same quality and performance as the original hex style Zip-in® screws.

View

Both Sizes of Malco's White Zip-In Register Screws

Zip-in® Register Screws

Malco’s Register Screws offer a secure option for fastening registers to walls.

View

Two Bags of Malco's Painted Sheet Metal Screws

Painted Sheet Metal Screws

Malco’s Painted Sheet Metal Screws are made from the same high quality Zip-in® design. Offered in clay, musket bronze, royal brown, white, almond, and classic cream.

View

New


All 4 Sizes if Malco Products Bit Extensions - Impact Grade

Impact Grade Quick-Change Extension Bits

Extensions fit any power drill or 1/4-inch power drive holder. Ball bearing on extensions’ holders provides a positive lock on 1/4-inch hex shank chuck drivers and bits.

View

Hand Seamers with Forged Jaws

For bending metal and flattening seams, as well as straightening sheet metal or safely gripping and moving metal on the job.

View

S10

Cast Steel Seamer & Tongs

Durable all-cast-steel construction, maneuverable offset and straight designs, versatile deep jaw openings, precise 135 degree bending capabilities and non-marring vinyl-gripped jaw options.

View

Malco's Portable Mini-Brake for Sheet Metal

Portable Mini-Brake

Makes bends to 135 degrees in galvanized sheet steel up to 22 gauge (0.86 mm).

View

Malco's MB48B Sheet Metal Mini-Brake

Pan Style Mini-Brake

Fabricate pans and boxes, flashing and fascia corners, plus large metal duct, and roofing components on the job.

View

Malco 24 inch Sheet Metal Folding Tool

Sheet Metal Folding Tool: Fixed Length and Depth

Folding Tool seams are formed from two steel halves, permanently joined together. Handy sight holes ensure proper depth alignment. A perfect sheet metal tool for forming on the job.

View

“Gold Standard” Sheet Metal Hole Cutters and Cutter Bits

Distinctive gold Bits, Bearings and Pivot Pin signify the longest lasting, fastest cutting, easiest adjusting solution for cutting holes in sheet metal. Up to 20-gauge (1.02 mm) capacity in galvanized steel.

View

Malco Products AVM6 EV, Mini Left Cutting Sheet Metal Snip

Aviation “Mini” Snips – Left and Right Cutting Offset

The compact, offset AVsMini easily goes to work in tight spaces where full-size aviation snips are challenged. Offered in both a right and left offset cut.

View

New


Malco's Aviation Sheet Metal Snip

Aviation Snips with Power-Fit™ Hand Grips – AVs

Aviation style sheet metal snips for straight cuts and slightly curved cuts in either direction. Power-Fit™ Performance Hand Grips with forged steel jaws, torsion handle spring and easy release side latch.

View

New


Malco's AV6 Offset Sheet Metal Aviation Snip

Aviation Snips with Power-Fit™ Hand Grips: Offset AVs

Aviation style offset sheet metal snips for straight cuts and slightly curved cuts in either direction. POWER-FIT™ performance hand grips, easy release latch, forged steel jaws, and ergonomic hand guards.

View

Malco AV8 Left Cutting Aviation Style Sheet Metal Snips

Aviation Snips – Left Cutting and Right Cutting Vertical

Left-cutting and right-cutting forged steel jaws are set at a 90-degree angle to allow easy gripping when cutting sheet metal in tight spaces or overhead.

View

Malco Products Max200 Aviation Snips

Aviation Snips: Max2000®

Max2000 and Max2000 Classic: Standard Left, Right and Combination Cutting Aviation Snips have wide-opening jaws with a serrated lower blade for fast controlled cuts in vinyl plastics, layered metals and seams. Precisely ground blade tips also cut into tight spaces and flush to 90° walls.

View

Malco Products Max 2000 Offset Aviation Snips with red handles

Offset Aviation Snips: Max2000®

The Max2000 Offset Aviation Snips are offered in two handle styles, regular Max2000 and Max2000 Classic. Both handles provide superior hardened blade edges for “maximum” cutting life.

View

Malco Products Bulldog Style Aviation Snip

Bulldog Aviation Snips: Max2000®

Malco’s Max2000 bulldog notching and trimming aviation snip with Euro-styled ergonomic handles.

View

Malco Double Cut Style Aviation Snips

Double Cut Aviation Snips: Max2000®

Max2000 distortion-free, double-cut aviation snip with Euro-styled ergonomic handles.

View

Malco's M12A 12" Andy Classic Snip with a grey aluminum casting

Andy Classic Aluminum Handled Snips 12″

12 inch (31 cm) long aluminum handled snips feature Andy Classic style handle loops. Replaceable heat treated blades are great for cutting sheet metal, copper, aluminum, or vinyl siding material.

View

Malco's M12N 12" Andy Snip with a grey aluminum casting

Andy Aluminum Handled Snips 12″

12 inch (31 cm) long aluminum handled snips with heat treated cutlery grade replaceable steel blades. Ideal for cutting vinyl siding, sheet metal, copper, or aluminum.

View

Malco's M14A 14" Andy Classic Snip with a grey aluminum casting

Andy Classic Aluminum Handled Snips 14″

14 inch (36 cm) long aluminum handled snips feature Andy Classic style handle loops. Replaceable heat treated blades are great for cutting sheet metal, copper, aluminum, or vinyl siding material.

View

Malco's M14N 14" Andy Snip with a grey aluminum casting

Andy Aluminum Handled Snips 14″

14 inch (36 cm) long aluminum handled snip with heat treated cutlery grade replaceable steel blades. Ideal for cutting vinyl siding, sheet metal, copper, or aluminum.

View

M12NG: Andy 12 Inch Gripped Pattern Snip

Andy Aluminum Handled Snips 12″ (Gripped)

12 inch (31 cm) long aluminum handled snips with comfort grips for better fit, feel, and control. Easily replaceable blades are ideal for cutting vinyl siding, sheet metal, copper, or aluminum.

View

Father's Day Tool Gift Ideas ULC10

Ultra Lightweight Metal Cutting Snips

The ULC10 Ultra Lightweight Metal Cutting Snip offers a light, yet powerful option for cutting aluminum, and 26 gauge steel.

View

forged steel snips

Forged Steel Snips

Forged steel snips for cutting straight, wide curves, and notches. Three types of forged snips from Malco include regular pattern, circular duckbill, and bulldog pattern snips.

View

Malco N1R Sheet Metal Notcher

Hand Notcher – 13/16 Inch and 1 Inch

Model N1R for metal duct corner notches and take-off tabs makes a clean 30° “V” shaped cut in 24-gauge (0.71 mm) galvanized steel. Model N2R for metal duct corner notches makes a clean 1-inch deep “V” shaped cut in 24-gauge (0.71 mm) galvanized or (0.61 mm) mild steel.

View

Hole Punch – Sheet Metal, Vinyl Plastic

Use for edge hole applications in sheet metal or vinyl plastic including metal ductwork and vinyl window extrusions.

View

Malco SL1R Sheet Metal Snap Lock Punch

Snap Lock Punch for Sheet Metal

Raises a projection along edge of sheet metal for locking into rolled edge of sheet to be joined.

View

Malco DS1 Duct Stretcher

Duct Stretcher – Straight

The low profile and straight body of the DS1 Duct Stretcher allows for use in some of the tightest quarters.

View

Malco's Offset DS2 Duct Stretcher

Duct Stretcher – Offset

The offset design of the DS2 duct stretcher provides knuckle-free contact when slipping drive cleats into place.

View

Malco Locking Duct Stretcher

Locking Duct Stretcher

Locking duct stretcher pulls duct sections together and holds them in place while freeing both hands to align and install drive cleats.

View

Sheet Metal Hammers: Riveting

Available in vinyl gripped and leather gripped.

View

Malco's Sheet Metal Setting Hammer with a tan brown leather grip

Sheet Metal Hammer: Setting

Available in vinyl gripped and leather gripped.

View

Duct Ripper

Specially angled ground tip easily punctures and rips duct to the desired length starting hole.

View

28 Gauge Dampers

Available with or without handles

View

Damper Regulator Hardware

For use on 24-30 gauge galvanized steel.

View

Magnetic Hex Chuck Drivers – Color Coded

Malco precision fit and hardened Magnetic Hex Chuck Drivers, with 1/4-inch power insert shanks.

View

Malco's Sheet Metal Vent Hole Saw

Vent Saw

Designed for cutting all types of hard and soft wood, and other non ferrous materials including plywood, composition board and siding.

View

Carbide Tipped Rotary Percussion Bits

Use in any rotary or rotary percussion drilling device for unexcelled performance in brick, tile, granite, concrete, masonry and other similar hard and dense materials.

View

Sheet Metal Double Ender Drill Bits

Two points for twice the life, twice the convenience.

View

Malco's Sheet Metal Drill Bit

Sheet Metal Drill Bits

Sheet metal drills with 135° split point design bite into metal precisely where wanted – will not wander.

View

Step Drills

A unique double flute design ensures the penetration of soft or thin materials at the proper speed.

View

Magnetic Bit Holder

Power drive 1/4-inch hex shank fits any power drill or 1/4-inch power drive holder. Accepts 1/4-inch hex shank insert bits.

View

Phillips Chuck Drivers

Power drive 1/4-inch hex insert shank fits any electric power drill or 1/4-inch power drive holder.

View

Phillips Insert Bit

Fits any 1/4-inch hex magnetic bit holder.

View

Hand Riveter: 2IN1

Rivet gun for blind rivets with 1/8 inch thru 3/16 inch mandrels.

View

Hand Riveter: Economy

Lightweight, compact size and slim nose projection allows this riveter to go wherever the work is.

View

Blind Rivets

Malco blind rivets provide a strong, secure connection between 2 or more sheets of material, that will not loosen with vibration.

View

Painted Rivets with Aluminum Rivet and Mandrel

Painted rivets packaged in 100 piece bags.

View

Easy Dispensing Caulking Gun CG18

Smooth action with large, comfortable power grip.

View

Flexible Lightweight Caulking Gun CG12

Compact design stores in a toolbox.

View

Professional Square Piston Design Caulking Gun CG20

Heavy duty professional model caulking guns with thumb-activated pressure release.

View

Utility Caulking Gun CG10

Easy loading and lightweight for smooth, clean operation.

View

Malco A60 Sheet Metal Scribe Tool

Adjustable Sheet Metal Scribe Tool

Measure, mark and scribe trim lines on sheet metal in one easy operation. Set desired trim depth on scriber extension and tighten knob.

View

Carbide Tipped Scribe

Solid carbide tip for scribing fine lines on hardened steel as well as glass, ceramics, plastics or sheet metal.

View

Malco 18 and 24 Dividers

Fast adjusting Scribers

Accurate and fast adjusting. Two sizes for circles up to 32” (81 cm) and 42” (107 cm). Points are easily resharpened or replaced. Nickel plated steel body.

View

Malco 2DH Duct Holder

Duct Holder

For holding sheet metal ductwork in place. Duct Holders: 1-Pair of clamps with chain.

View

Starter kit for HVAC career path

Deluxe HVAC Starter Kit – 29 Piece

27 Tools and FREE bags of Zip-in and Bit-Tip Screws kitted in a TB1 Soft-Sided Tool Bag or TBP33 Tool Backpack.

View

Malco Sheet Metal Tool Kit with 16 tools

HVAC Starter Kit – 16 Piece

14 Tools and FREE bags of Zip-in and Bit-Tip Screws kitted in a TB1 Soft-Sided Tool Bag or TBP33 Tool Backpack.

View

Blue Impact-Grade Magnetic Hex Chuck Drivers

These distinctive blue chuck drivers withstand impact driver stress characteristic for each fastening application.

View

Pin Vise

Use in hand or insert in drill chuck. Pin Vise holds wire gauge drill sizes 61 to 80.

View

Red Lip Plastic Anchors

Use with wood, sheet metal or lag screws. Flexible anchor is ideal for masonry or stone. Lip on collar prevents anchor from pushing through hole in hollow walls. Kits contain equal quantities of anchors and screws with one matching carbide tipped drill bit.

View

Scratch Awls

Use to scribe lines on metal, plastic and a variety of other materials. Pierce holes in wood, plastic, leather, – even light gauge metal.

View

Malco A40 Sheet Metal Scribe

Pocket Sized Sheet Metal Scribe Tool

Scribe commonplace trim lines on galvanized sheet metal quickly and accurately.

View

Square Head Chuck Drivers

For driving square head, (Robertson), screws into wood and sheet metal.

View

Expandable Trammel Points

Two sizes handle a variety of layout applications. The TR42 expands to a big 42” (107 cm) radius. The compact TR18 expands to 18” (46 cm) and stores in most tool bags.

View

Soft Sided Tool Bag

Rugged, heavyweight nylon tool bag organizes large and small tools with ample capacity and multiple interior and exterior pockets.

View

Father's Day Tool Gift Ideas Tool Backpack

Tool BackPack

Easily organize, protect and transport your tools in a 33-pocket Ballistic Nylon Backpack.

View

Plastic Tote Tray

Heavy duty, crush proof tote trays are great for carrying hand tools and fasteners to the job site.

View

4MC14 Catalog Shot

Reciprocating Saw: Metal

Reciprocating saw blade for cutting various forms of metal.

View

4P6 Catalog Shot

Reciprocating Saw: General Purpose

Reciprocating saw blades for general purpose use. Blades capable of cutting in wood with nails, metal under 3/16 inches, non-ferrous metals, plastic fiberglass, and plaster.

View

Aluminum Straight Edge Rule

Made from .125 thickness extruded aluminum.

View

Precision Multi-Use Combination Square

Machined head has self aligning zinc drawbolt for easy blade installation.

View

Malco Products L5 Pocket Level

Pocket Level

Malco offers a convenient pocket level for easy storage. Built with a strong molded plastic frame with pocket clip.

View

Tinner’s Circumference Rules

Standard bench rules with circumference readings for sheet metal work.

View

1" x 16' Magnetic Tip Tape Measure

Magnetic Measuring Tape

Pick the one tape from a choice of three that is ideal for your metalworking needs!

View

Measuring Tape

Malco Non-Magnetic Measuring Tape offered in 25′ and 30′ length with double riveted tip connection and tough rubber-clad housing.

View