Home / Roofing Essentials
Trademark
Product Categories
Markets
New
Malco TurboShear® Rotary Panel Cutter – TSPC1
Get the Job Done Right with Malco’s TurboShear® Rotary Panel Cutter. Purpose-built for professionals, this high-performance tool is the solution you need to cut ribbed roofing and wall panels with […]
FSXSRPFW – Power Assisted Seamer Replacement Forming Wheel Kit for FSXS
This genuine Malco replacement forming wheel kit is designed specifically for the FSXS Power Assisted Seamer. Engineered to match the original factory specifications, the kit restores precise metal forming performance […]
FSXCRPC2 – Power Assisted Cutter Replacement Cutting Disc Set for FSXC2
This genuine Malco replacement cutting disc set is designed for the FSXC Power Assisted Cutter. With a 22GA cutting capacity, these high-quality discs are engineered to deliver clean, precise cuts […]
FSXCRPC – Power Assisted Cutter Replacement Cutting Disc Set for FSXC
This genuine Malco replacement cutting disc set is designed for the FSXC Power Assisted Cutter. With a 24GA cutting capacity, these high-quality discs are engineered to deliver clean, precise cuts […]
FSXS2RPDW – Power Assisted Seamer Replacement Drive Wheel Kit for FSXS2
Optimize the performance and lifespan of your power-assisted metal roofing seamer with factory approved replacement drive wheels from Malco. Normal wear of the wheels on your frequently used seamer will require you to replace your drive wheels over time. […]
FSXSRPDW – Power Assisted Seamer Replacement Drive Wheel Kit for FSXS
FSXSRPDS – Power Assisted Seamer Replacement Drive Shaft Kit for FSXS and FSXS2
Maintain the performance and power transmission of your seamer with this genuine Malco replacement drive shaft kit. Compatible with both the FSXS and FSXS2 Power Assisted Seamer models, this kit […]
FSXS2RPFW – Power Assisted Seamer Replacement Forming Wheel Kit for FSXS2
This genuine Malco replacement forming wheel kit is designed specifically for the FSXS2 Power Assisted Seamer. Engineered to match the original factory specifications, the kit restores precise metal forming performance […]
FSHS2RPJ – Malco Hand Seamer Replacement Jaw Kit (2”) for FSHS2
This genuine Malco Replacement Jaw Kit is designed for the 2″ FSHS Hand Seamer. Engineered to original specifications, this kit restores optimal performance and grip strength for precise bends and […]
FSXSRPSA – Power Assisted Seamer Replacement Support Arm for FSXS and FSXS2
Keep your power-assisted seamer stable and aligned with this OEM replacement support arm. Compatible with both the FSXS and FSXS2 models, this part is essential for maintaining proper support and […]
FSXSRPH – Power Assisted Seamer Replacement Handle for FSXS AND FSXS2
This genuine replacement handle is designed for use with both the FSXS and FSXS2 Power Assisted Seamers. Built to original specifications, it restores control and comfort, ensuring safe and efficient […]
FSXSRPGW – Power Assisted Seamer Replacement Guide Wheel Kit (1.5”) for FSXS
This genuine Malco replacement guide wheel kit is designed specifically for the FSXS Power Assisted Seamer. Sized at 1-1.5″, it restores smooth, accurate tracking and alignment, helping your tool perform […]
FSXS2RPGW – Power Assisted Seamer Replacement Guide Wheel Kit (2”) for FSXS2
This genuine Malco replacement guide wheel kit is designed specifically for the FSXS2 Power Assisted Seamer. Sized at 2″, it restores smooth, accurate tracking and alignment, helping your tool perform […]
FSHSRPJ – Malco Hand Seamer Replacement Jaw Kit (1”-1.5”) for FSHS
This genuine Malco Replacement Jaw Kit is designed for the 1-1.5″ FSHS Hand Seamer. Engineered to original specifications, this kit restores optimal performance and grip strength for precise bends and […]
Malco Long Cut AVs® Metal Cutting Snip – Combo (Straight, Left & Right Cuts) – 3″ Cut Length – Yellow Grip AV33
Malco Long Cut AVs® produce longer and faster cuts with their long blade design. The AV33 model is a combo snip featuring a yellow-colored grip with straight, right, and left […]
Malco Long Cut AVs® Metal Cutting Snip, Right Offset, 2-1/4″ Cut Length – Green Grip AV73
Malco Long Cut AVs® produce longer and faster cuts with their long blade design. The AV73 model features a green colored grip and is designed with a right offset style […]
Malco Long Cut AVs® Metal Cutting Snip Left Offset, 2-1/4″ Cut Length – Red Grip AV63
Malco Long Cut AVs® produce longer and faster cuts with their long blade design. The AV63 model features a red colored grip and is designed with a left offset style […]
Vertical AVs® Snip, Left Cut, AV8
Get a better grip with Malco’s AV Aviation Snips! The forged steel jaws of this left-cutting snip are set at a 90-degree angle to allow easy gripping when cutting sheet […]
Vertical AVs® Snip, Right Cut, AV9
Get a better grip with Malco’s AV Aviation Snips! The forged steel jaws of this right-cutting snip are set at a 90-degree angle to allow easy gripping when cutting sheet […]
Offset AVs® Snip, Right Cut, AV7
Get a better grip with Malco’s AV Aviation Snips! Malco’s AV Aviation Snips feature POWER-FIT performance hand grips that increase productivity and distributes pressure evenly, which results in less user […]
Offset AVs® Snip, Left Cut, AV6
Offset Cut AVs® Mini Snip, Right Cut, AVM7 EV
With an overall length of only 7-1/8 inches (181 mm), the AVs® Mini easily goes to work in tight or awkward spaces where full-size aviation snips are challenged. A 3/4-inch […]
Offset Cut AVs® Mini Snip, Left Cut, AVM6 EV
Standard Cut AVs® Snip, Combo Cut, AV3
Standard Cut AVs® Snip, Right Cut, AV2
Standard Cut AVs® Snip, Left Cut, AV1
Get a better grip with Malco’s AV Aviation Snips! Malco’s AV Aviation Snips feature POWER-FIT™ performance hand grips that increase productivity and distributes pressure evenly, which results in less user […]
Progressive Profiling Bender Set, 1.5″ FSP1
A revolutionary tool for mechanical lock standing seam roof installation. The Progressive Profiling Bender Set from Malco Tools is a time-saving innovation for installing mechanical lock standing seam roofs. It […]
Power Assisted Metal Cutter, 2″ FSXC2
Malco’s power-assisted cutters are the fastest cutting machines on the market, making them the perfect hand-held equipment for effortless removal of 1.5 inch or 2 inch single and/or double mechanical […]
Power Assisted Metal Seamer, 2″ FSXS2
Malco’s power-assisted seamers are the fastest seaming machines on the market, making them the perfect hand-held equipment for effortless seaming. Similar to the FSXS, the FSXS2 is used to mechanically […]
FSHS2 Standing Seam Hand Seamer, 2″
Designed for seaming both the first (90°) stage and second (180°) stage locks of a mechanical seam, the FSHS2 is Malco’s recommended seamer for closing 2″ mechanical lock panels by […]
FSHS Standing Seam Hand Seamer, 1-1.5″
Designed for seaming both the first (90°) stage and second (180°) stage locks of a mechanical seam, the FSHS is Malco’s recommended seamer for closing 1″ or 1.5″ mechanical lock […]
Standing Seam Cutter, 1.5 Inch FSXC
Malco’s power assisted cutter is the fastest cutting machine in the market, making it the perfect hand-held equipment for effortless removal of 1″ or 1.5″ single and/or double mechanical lock […]
Two Station Bender, 150MM FS2F150
Save time on the job with Malco’s professional-grade 2-Station Metal Roofing Benders, which form 0°-100° bends on straight panels of any length on the jobsite, without waiting on wholesale roll […]
Two Station Bender, 200MM FS2F200
Two Station Bender, 350MM FS2F350
Two Station Disc, Double, Large FS2DL
Professional grade disc benders
One Station Disc, Small FS1DS
When you need to get the job done right and on time, you need professional-grade Metal Disc Benders by Malco, featuring removable discs for quick disassembly and mid-panel tool removal. […]
Two Station Disc, Double, Small FS2DS
Professional-grade Metal Disc Benders by Malco are built tough to bend metal roofing panels right on the jobsite, and feature removable discs for quick disassembly and mid-panel tool removal. Why […]
One Station Disc, Large FS1DL
Standing Seam Seamer, 1.5 Inch FSXS
Malco’s power assisted seamer is the fastest seaming machine in the market, making it the perfect hand-held equipment for effortless seaming of 1″ or 1.5″ single and/or double mechanical lock […]
Modular Metal Bender, Wide, 365MM FS1W365
Your search for a light, versatile, and modular bending tool is over: look no further than the professional-grade Metal Benders by Malco! Form 0-100° bends on straight or curved panels […]
Modular Metal Bender, Wide, 215MM FS1W215
Modular Metal Bender, Wide, 165MM FS1W165
Modular Metal Bender, Narrow, 165MM FS1N165
Modular Metal Bender, Narrow, 75MM FS1N75
Modular Metal Benders
TurboShear® – Heavy Duty, Sheet Metal Cutting Drill Attachment
Malco’s popular sheet metal tool quickly attaches to the chuck of a minimum 12-volt cordless or an A/C electric drill. Capable of 18 gauge capacity in galvanized sheet metal. Telescoping clamp fits large or small drill housing.
TurboShear® – Corrugated Metal Roof Cutting Drill Attachment
For cross-cuts, lengthwise trimming and circular or square outlets in 30 to 24 gauge (0.31 – 0.61 mm) corrugated metal.
TurboShear® – Double Cut Drill Attachment
Make your drill a double-cut metal shear. Now you can get double-cut performance in a versatile Malco TurboShear.
TurboShear® – Asphalt Shingle Cutter Drill Attachment
Attaches to corded or cordless drills for making straight or tight left cuts in asphalt roofing shingles.
3-Station Edge Roller ER3
Exclusive 3-station roller design ensures a uniform bend along entire length of material. The simplicity and time saving capabilities for the job at hand, make this a must have metal roofing tool!
High Leverage Drip Edge Folding Tools
Big 24-inch (61 cm)and the compact 18-inch (46 cm) folding tool makes 1-inch (25.4 mm) or 1-1/2-inch (38.1 mm) deep bends along drip edge of flat-pan standing seam metal roofing panels.
Hand Seamers with Forged Jaws
For bending metal and flattening seams, as well as straightening sheet metal or safely gripping and moving metal on the job.
Hand Seamers with Cast Zinc Jaws
For bending, seaming and straightening non-ferrous metals and limited flattening/straightening applications in light gauge steel.
Cast Steel Seamer & Tongs
Durable all-cast-steel construction, maneuverable offset and straight designs, versatile deep jaw openings, precise 135 degree bending capabilities and non-marring vinyl-gripped jaw options.
Stone Coated Steel Roofing Cutter
Fast, safe, precise cuts, 30% easier, all season long, in stone coated steel shingles, shakes and tile style roofing.
Double Cut Aviation Snips: Max2000®
Max2000 distortion-free, double-cut aviation snip with Euro-styled ergonomic handles.
Circular Saw Blade: Steel
Cool clean cuts in metal roofing and metal building panels.
Reciprocating Saw: Metal
Reciprocating saw blade for cutting various forms of metal.
