MalcoEdge™ Portable Lifter, 200 lb Capacity, 13 ft Lift Height, Mini-Split Condenser Lift (PL13220)

The Where To Buy map requires marketing cookies to be accepted. Please change your cookie preferences by clicking here and accepting cookies.


The portable lifter lets a single technician wall-mount a mini-split outdoor condenser without a second person to lift or hold it in place. It supports up to 220 lbs and lifts to a height of 13 ft.

Raise and lower the platform 3 ways: with a plug-in motor, with a power drill, or with a manual crank, which also works as a backup when power is not available. The same lifter can raise heavy tools and equipment to a single-story roof, so you are not carrying them up a ladder. It compacts for storage and transport and stands on its own when set up for use.

Features

  • One technician installs an outdoor mini-split condenser on a wall mount, with 220 lb capacity and 13 ft lift height
  • 3 ways to raise and lower: plug-in motor, power drill connection, or manual crank
  • Also raises heavy tools and equipment onto a single-story roof, with nothing carried up a ladder
  • Compacts down for storage and transport, then stands on its own once set up for use
  • Wall mounts, ground level work and single-story rooftop lifts on a jobsite

Specifications

Lift capacity: 220 lbs.
Lift height: 13 ft.
Lift options: Plug-in motor, power drill, manual crank
Platform size: 29-1/2” x 17” (unfolded)
Motor voltage: 120V
Weight: 66.81 lbs
Compacted dimensions: 48” x 12” x 12”

FAQs

Q1: What if power is not available on my jobsite?

A1: The portable lifter can be cranked with a cordless drill or with the included crank handle. DO NOT use an impact to power the lift.

Q2: How do I position the lifter as close as possible to a wall?

A2: The portable lifter can be positioned as close as 18″ from a wall (wall to center of lift). To do so, adjust the 2 legs without wheels to a shorter length to move the base closer to one side. Then move the leg supports from the lower hole to the upper hole. Once the legs have been adjusted to bring the lift closer to the wall, relevel the lift.

Q3: What do I do if I cannot pull out the Motorized/Manual selector?

A3: Lightly press the trigger to slowly activate the motor, and pull out the stop button at the same time to engage the internal gears.

Q4: Is the lift variable speed?

A4: Yes, the further the trigger is pulled, the faster it will go.

Q5: Which direction do I crank the handle to lift or lower?

A5: To lift, spin counterclockwise. To lower, spin clockwise.

Q6: What do I do if the lift shows signs of tilting?

A6: STOP the lifting operation immediately and lower the lifter back to the starting position. Redistribute the load so it is as centered as possible, or reduce the weight before lifting again.

Q7: What are the voltage requirements for the portable lifter?

A7: 115VAC, 60Hz

Q8: What extension cord should I use if I need one?

A8: An extension cord up to 25 feet must be a minimum of 14 gauge. Longer cords should be 12 gauge or larger.

Downloads

My Review for MalcoEdge™ Portable Lifter, 200 lb Capacity, 13 ft Lift Height, Mini-Split Condenser Lift (PL13220)

  • This field is for validation purposes and should be left unchanged.