MalcoEdge™ SS6014 Safe Seal HVAC Hose Set
The MalcoEdge™ SS6014 Safe Seal 3-Piece Hose Set is built for professional HVAC technicians who demand safety, flexibility, and durability on the job. Each 60″ hose features 1/4 SAE standard fittings and robust Safe Seal technology to minimize refrigerant leaks during system service. Designed for high-pressure performance, this color-coded set ensures smooth, efficient charging, recovery, and evacuation across AC and refrigeration systems. Ideal for daily field use, this set provides confidence and control for any HVAC task.
Features
- Complete 3-Hose Set – Includes red, blue, and yellow fittings for clear system identification.
- 60″ Hose Lengths – Offers ample reach for most AC and refrigeration service configurations.
- Safe Seal Technology – Minimizes refrigerant loss and cross-contamination during connection.
- Barrier 4-layer hose meets SAE J2196 and withstands A2L high-pressure use in tough environments.
- 1/4 SAE Standard Fittings – Compatible with most manifold gauge sets and service ports.
FAQs
Q: What do I do if the seals on my Easy Seal hoses leak?
A: Malco sells replacement seals to allow you to replace your seals in the field and
extend the life of your hoses.
Q: Does hose length matter when pulling a vacuum?
A: Yes, the shorter the hose and the larger the diameter, such as a 3/8″ MalcoEdge
Turbo Flow hose will be more efficient when vacuum is pulled.
Q: Can I use the same hoses with a variety of refrigerants?
A: MalcoEdge hoses are compatible with popular refrigerants however we do not
recommend using multiple refrigerants in the same hoses unless you take the time
to flush the hoses using a product such as ACE Powerflush. Alternatively, we
recommend you use different hoses for specific refrigerants to prevent cross
contamination of refrigerants from oils remaining in the hoses.
Q: Do I need to flush and clean my equipment when switching between refrigerants?
A: Some refrigerants cannot be mixed as they use different lubricants. As a best practice,
the hoses, manifolds, and other components need to be flushed using a cleaner to ensure
they do not cross contaminate. We recommend flushing the system with ACE Powerflush
between services.
Q: What are the working and burst pressures for these hoses?
A: The working pressure pressure is 800 PSI and the burst pressure is 4000 PSI.
Q: What do I do if my hoses are either engaging a Schrader valve too early or not
engaging a valve enough to fully open the valve?
A: The core depressors are threaded. Adjust the height of the core depressor by screwing
further in or out.
Q: Do the MalcoEdge Safe Seal hoses vent to atmosphere when disconnecting the hoses
from the service port?
A: No, the core depressor when retracted seals the refrigerant in the hose.