Home / Fence Installation Essentials
Trademark
Product Categories
Malco Edge Categories
Markets
Fencing Pliers
For chain link fence. Legendary all-steel fencing pliers design features three serrated jaw areas, three built-in wire cutter locations and a compact, rounded and tapered nose. 8-in (203 mm) and 10-in (254 mm) sizes.
Multi-Purpose Fencing Pliers
Combination hammer, wire tensioner, staple remover, wire cutter and splicer.
Hog Ring Pliers 9-Gauge
Commercial grade Hog Ring Pliers with Magazine installs 9-Ga. (3.8 mm) collated aluminum rings or exclusive 9-Ga. (3.8 mm) collated steel rings. Easily secures 7-Ga. (4.5 mm) wire to 9-Ga. (3.8 mm) chain link fence.
Hog Ring Pliers with Self-Feeding Magazine for 1-3/16″ (30 mm) Rings
The HRP4 Chain Link Fence Stapler works fast to install Malco HR4 (1-3/16″, 30 mm) Hog Ring Staples.
Hog Ring Pliers with Self-Feeding Magazine
The HRP2 Chain Link Fence Stapler works fast to install Malco HR2 (3/4″, 20 mm) Hog Ring Staples capable of gripping a combination of 9-gauge (3.8 mm) chain link and 7-gauge (4.6 mm) tensioning wire.
Hog Ring Pliers – Compact
HRP1 Chain Link Fence Stapler is compact, lightweight and spring actuated. Compatible with both Malco HR1 (5/8″, 16 mm) and HR2 (3/4″, 20 mm) Hog ring Staples.
Hog Ring Staples
The Malco Hog Ring Staple offering ranges from petite 5/8″ (16 mm) and versatile 3/4″ (20 mm) galvanized rings to big 1-3/16″ (30 mm) galvanized. See specification table and diagrams for easy selection.
Hog Ring Staples 9-Gauge
The Malco Hog Ring Staple offering ranges from petite 16-ga. (1.3 mm) and versatile 14-ga. (2 mm) galvanized rings to big 9-ga. (3.8 mm) galvanized. See specification table and diagrams for easy selection.
Offset Ratcheting Wrench for Fencing
Offset ratcheting wrench with 12-point sockets at each end accommodates 1/2 inch and 9/16 inch hex fasteners.
Fence Tensioning Claws
Chain link fencing claws for easy one person installation.
Vinyl Fence Hand Notcher – 1/2″ and 3/4″
Creates 1/2 and 3/4 inch (19.1 mm) wide, 7/8 inch (22.2 mm) deep louver-shaped tabs to lock vinyl pickets and rails in place.
